Paint decontamination with a wash mitt!

The Nanoskin Autoscrub Wash Mitt is a fast, easy way to remove above surface contaminants on automotive finishes. The Nanoskin Autoscrub Wash Mitt is a rugged microfiber mitt with one side finished in a high-tech rubber polymer coating that removes above surface contaminants like paint overspray, bugs, tar, rail dust and industrial fall out – as you wash your vehicle! The Nanoskin Autoscrub Wash Mitt is better known as the clay mitt because it effectively replaces the traditional clay bar as your go-to means for removing bonded contaminants. The Nanoskin Autoscrub Wash Mitt is perfect for professional detailers or those who simply seek an easier means of removing contaminants before polishing or waxing.

Paint decontamination is probably the single most important step in detailing a car. If the surface isn’t squeaky clean, your polishes won’t be as effective and your wax, sealant or coating won’t fully bond to the surface. Until innovators in the industry such as Nanoskin introduced rubber polymer technology for automotive paint decontamination, the only way to cleanse paint of above surface contaminants was with detailing clay.

While detailing clay gets the job done, it is often time consuming and can be costly if you accidently drop the bar on the ground, rendering it useless as you should discard it at that point. The Nanoskin Autoscrub Wash Mitt requires less time than detailing clay while doing a better job at removing contaminants so you can spend more time on the paint polishing process. If you drop the Nanoskin Autoscrub Wash Mitt on the ground, simply rinse it off with water.

You don’t have to be a professional detailer to utilize the many benefits of the Nanoskin Autoscrub Wash Mitt. If you’re an avid car care enthusiast that accepts nothing less than absolute perfection, add a Nanoskin Autoscrub Wash Mitt to your detailing collection so when it comes time for a full detail on your daily driver or show car, you can spend more time performing the fun aspects of detailing like hand-applying your favorite carnauba paste wax. The medium grade Nanoskin Autoscrub Wash Mitt is ideal for daily drivers or those with heavy contaminants.

Directions: Use only on clean and cool surfaces. Mix one ounce of Nanoskin Bubble Bath Wash & Shine Shampoo per gallon of water. Rinse surface with water to flush away loose dirt. Wash and rinse in sections using Autoscrub Wash Mitt using light pressure. Begin with the roof, and work the suds down to the hood, trunk and sides. Rinse with clean water and dry vehicle using a Waffle Weave Guzzler Drying Towel.

Note: This is the MEDIUM GRADE version of the Autoscrub Mitt. It is designed for vehicles with moderate to heavy contaminants. To achieve flawless paint when you’re finished using the Autoscrub Mitt, we recommend following up with a fine polish like Pinnacle Advanced Finishing Polish and a polishing pad on your dual action polisher.

Mitt measures 6" x 8.7"