Blackfire Wet Diamond All Finish Paint Protection 16oz
BLACKFIRE Wet Diamond
All Finish Paint Protection
Don't just turn heads.
If you're looking for a high-definition, laser-sharp shine guaranteed to turn heads, look no further. This is the current state-of-the-art in paint sealant technology. Wet Diamond, All Finish Paint Protection is the only domestic paint sealant I know of to use a revolutionary, crystal polymer recently released by Wacher- Chemie, Munich, Germany. This polymer has a crystal structure that refracts light, similar to a diamond, to create a vibrant, high-energy, super slippery, head-turning finish. It can be used by itself as the final sealant or as the foundation of BLACKFIRE's signature Wet-Ice over Fire shine.
Wet Diamond, All finish Paint Protection is a paint-friendly, oil-in-water, emulsion safe for all finishes with or without a clear coat. This emulsion contains a small amount of a very refined mineral spirit in a water base. Multiple coats can be layered to deepen the gloss without drying or weakening the paint.
BLACKFIRE Wet Diamond, All Finish Paint Protection can be applied by hand or dual-action, machine polisher. It applies easily and buffs off uniformly even in climates of high heat and high humidity. You simply walk around your car wiping on and buffing off as you go.
The incredible shine is resistant to detergent washings and ultraviolet radiation. This keeps your car?s finish protected month after month and wash after wash.
BLACKFIRE Wet Diamond All Finish Paint Protection is now super-charged with Polycharger!
No mixing or blending is required. The Polycharger technology is built-in! Polycharger boosts slickness and shine while extending the protection and durability. Polycharger does this by interlocking or cross-linking polymers to create a barrier of invisible amour with tremendous strength.
Hand Application Tips:
Always use on a cool surface out of direct sunlight.
Apply a Quarter size amount of product on a dry applicator pad and wipe on the surface using small circular motions. Allow Wet Diamond All Finish Paint Protection to dry before buffing.
Buff haze with a clean Microfiber Buffing Cloth.
Machine Application Tips:
Place a 6-1/2 inch, Hi-Gloss, Constant Pressure, Blue Finessing Pad on a 6 inch Hook and Loop Backing Plat and attach to your 7424 machine polisher.
Work on a small area, 24 to 36 inches square, out of direct sunlight.
Apply two 6 to 8 inch lines of All Finish Paint Protection directly to the surface.
With the machine off, spread the sealant over the surface using the dry foam pad. This coats the foam pad and the paint with sealant. (I prefer to apply this sealant with a dry pad, without using any pad lubricant.)
Place theBlue Finessing Pad on the paint and turn the machine on. Set the speed dial on the polisher between 3-1/2 and 4.
Work the pad over the surface in a back-and-forth motion and then an up-and-down motion. Apply until the sealant starts to dry. Cover one section of the vehicle at a time (i.e. the hood, a door, fender, etc.)
Allow a haze to form. Hand buff to a brilliant shine with a Microfiber Buffing Cloth.
BLACKFIRE Wet Diamond All Paint Protection (16oz)
- Brand: BLACKFIRE
- Product Code: 4219
- Availability: In Stock